Posiflex LM-2008E Bedienungsanleitung PDF herunterladen

Part 1

I. FEATURES

• 8” LCD monitor with tilt adjust for industrial and commercial use

• Application covers POS, POI (Kiosk), Factory Automation etc.

• High quality TFT LCD panel

• Spill proof and easy maintenance structure allowing easy cleaning

• Super VGA interface super resolution up to 800 x 600 pixels

• Support power supply through VGA cable from Posiflex POS systems to

operate without power adaptor

• Resistive type extra long life touch panel in USB interface (for TM-2008)

• Touch functions include left/right button, double click, drag & drop (for

TM-2008)

• Touch beep can be pitch adjusted/enabled/disabled by software control (for

TM-2008)

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions manual, may cause interference to radio communications. It has been

tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules,

which are designed to provide reasonable protection against interference when operated in a commercial

environment. Operation of this equipment in a residential area is likely to cause interference in which case the

user at his own expense will be required to take whatever measures to correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any person other than the

authorized technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the

user does not follow the instructions in application of this merchandise. The manufacturer is by no means

responsible for any damage or hazard caused by improper application.

ABOUT THIS MANUAL

This manual assists the user to utilize the LCD Monitor LM-2008 and the Touch Monitor TM-2008.

These series provide adjustable robust construction for 8” LCD display with maximum resolution of 800 x 600.

TM-2008 provides also a durable touch screen over the LCD panel.

The manufacturer of the LM-2008 and TM-2008 series heartily apologizes to the user for reserving

the right to change or to modify this manual without notice due to the rapid and constant progress and

improvement on science and technology. The user may always obtain the most up to date information through

any of our web sites: http://www.posiflex.com, http://www.posiflex.com.tw, http://www.posiflexusa.com.

 Copyright Posiflex Technologies, Inc. 2009

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technologies, Inc..

Other brand and product names are trademarks and registered trademarks and service marks of their

respective owners.

LM-2008 / TM-2008

LCD / Touch Monitor

User’s Manual

Rev. Original

P/N:

832

09000

1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1 - User’s Manual

Part 1 I. FEATURES • 8” LCD monitor with tilt adjust for industrial and commercial use • Application covers POS, POI (Kiosk), Factory Automat

Seite 2 - IV. PARTS IDENTIFICATION

Part 10 警告使用者這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用者會被要求採取某些適當的對策。 T31454

Seite 3 - F. POWER LED INDICATION

Part 2 II. MODEL NUMBERS LM-2008: 8” LCD Monitor on base stand TM-2008: 8” LCD Touch Monitor on base stand III. CARTON CONTENTS 1. LCD or T

Seite 4 - V. HARDWARE INSTALLATION

Part 3 C. RIGHT SIDE VIEW D. REAR VIEW E. CONNECTOR AREA F. POWER LED INDICATION • Orange: standby (no signal) •

Seite 5 - USB touch calibrator

Part 4 V. HARDWARE INSTALLATION A. CABLE CONNECTIONS 1. Connect the VGA cable that has both 3 x 5 D sub male ends to VGA port in connector area o

Seite 6 - VII. APPLICATION

Part 5 items in this utility should be easily understandable to average user. Followings are just some reminders on some items. Ÿ Calibrate – This b

Seite 7 - OSD CONTROL

Part 6 Ÿ Enable ... – Each check box determines whether or not to engage edge acceleration against which edge of screen. Ÿ Margin – This list butt

Seite 8

Part 7 VGA signal is missing with the power status at ON, the monitor displays a blue message box “No Signal” at center area for about 4 seconds an

Seite 9

Part 8 VIII. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of scre

Seite 10

Part 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Posiflex LM-2008E Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Monitore Posiflex LM-2008E herunter. Posiflex LM-2008E User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Monitore Posiflex LM-2008E